Antminer L3+ ASIC Litecoin Miner

Hash Rate 504MH/s. A variation of +/- 5% is expected.
Power Consumption 800W +10% (at the wall, with Bitmain’s APW3 PSU, 93% efficiency, 25°C ambient temperature)
Power Efficiency 1.6J/MH +10% (at the wall, with Bitmain’s APW3 PSU, 93% efficiency, 25°C ambient temperature)
DC Voltage Input 11.60 ~ 13.00V
Chip Type BM1485 ASIC chip
Chip quantity per unit 288 chips on four hashing boards, 72 chips on one hashing board
Dimensions 352mm (l) x 130mm (w) x 187.5mm (h)
Operating temperature 0°C – 40°C
Network connection Ethernet

Antminer L3+ The BM1485 ASIC chip

Finally an ASIC chip to mine Scrypt coins
The BM1485 chip, the first Litecoin Application Specific Integrated Circuit (ASIC) chip in more than two years, is designed by the same team that designs the world’s most power-efficient ASIC chips for Bitcoin mining.

Each Antminer L3+ employs 288 such chips to deliver more hashrate and efficiency than any previous Litecoin miner on the market.

A Compact Time-tested Design

World’s most powerful Litecoin miner, yet smaller than many portable boom-boxes
The Antminer L3+ follows a form factor similar to that of the hugely popular Antminer S9 and is nearly the same size.

Whether in a home or in a mining farm with several other L3+ miners, the Antminer L3+’s small footprint fits well in all locations.

Controlled by Texas Instruments’ 1GHz ARM® Cortex-A8 Microprocessor
L3+’s control board uses Texas Instruments’ AM335x 1GHz ARM® Cortex-A8 microprocessor
The Antminer L3+’s control board employs the fast AM335x 1GHz ARM® Cortex-A8 microprocessor and supports Gigabit Ethernet to ensure that mined blocks are submitted instantly.

Engineered to Remain Powerful yet Cool

A high-grade aluminum case, customized heat-sinks and two computer-controlled fans to keep it cool
The L3+ utilizes a combination of conduction and convection cooling to make the world’s most powerful Litecoin miner perform at its best while creating no more heat than the latest terahash Bitcoin miner.

Every chip of the L3+ is fitted with custom-made heat sinks that are made of a high-grade Aluminum alloy. The case of the L3+ is made of the same material. Two computer-controlled high speed fans on both ends of the “tube” ensure that the hot air is rapidly replaced by cooler air at the required pace.

Ease of use

Antminer’s user interface has been carefully designed keeping the needs of our users in mind
After you have accessed the Antminer’s user interface, all you need to do is to enter your wallet address and mining pool settings to start mining. The user interface also allows you to customize certain settings and to upgrade to new firmware releases from Bitmain.

Related Post

Spondoolies SP20 bitcoin miner 1.7 TH/s max hashrate tops its nearest rival, the AntMiner S5 Costs just $110, can be purchased on eBay or Amazon Quiet at low speeds, generat...
Nvidia GTX 1080 Ti most powerful GPU for mining Nvidia GTX 1080 Ti in mining The Nvidia GTX 1080 Ti remains one of the most powerful graphics cards in the world, and is our recommendation as the ...
ASUS ROG Radeon RX Vega 64 STRIX GAMING 8GB 2048-B... ASUS ROG Radeon RX Vega 64 STRIX GAMING 8GB 2048-Bit HBM2 overview Powered by AMD’s Vega architecture, the ASUS ROG Strix RX Vega64 OC Edition deli...
Monero XMR – secure, private, untraceable cr... Monero Private Digital Currency Monero is a secure, private, and untraceable cryptocurrency. It is open-source and accessible to all. With Monero, ...

Comments

comments

Leave a Reply

Your email address will not be published. Required fields are marked *